M12 Insert Nut ( Dia 12mm )
- Buy 50 for Rs 19.00 each and save 5%
- Buy 100 for Rs 18.40 each and save 8%
- Buy 200 for Rs 18.01 each and save 10%
- Buy 500 for Rs 17.00 each and save 15%
- Buy 1000 for Rs 16.00 each and save 20%
- Buy 5000 for Rs 15.00 each and save 25%
- Buy 10000 for Rs 14.01 each and save 30%
- Brand: ILS
- Size: M12 (12 mm inner Diameter)
Type: M12 Insert Nut ( Dia 10mm )
- Material: Mild Steel
- Colour: Silver White
- Surface Finish: Nickel Plated
IndiaLocalShop imports Mild steel Insert Nuts, rivet nut knurled type in Mild steel grade in round ,We have all sizes from m3 to m12 in ready stock.
Reduced countersunk (thin sheet) rivet nuts with a knurled body open end are available in diameters from M3 to M12 to suit various grip ranges.
|Series||Inner Dia(mm) ID||Outer Dia(mm) OD||Length (mm)|
Reduced countersunk (thin sheet) rivet nuts with a knurled body and open end are also commonly know as Rivnuts, Blind Nuts, Thin Sheet Nuts and Nutserts.
These rivet nut fasteners are a form of internally threaded insert and are used in applications where the material (wall) thickness is too small to tap a conventional thread, therefore by using rivet nuts a strong thread is created in thin sheets of material for high strength fastening from bolts and other threaded articles.
The open end style rivet nut allows the stud or male threaded component to thread through the rivet nut without limiting the length or protrusion of the male threaded part.
The knurled body of the reduced countersunk rivet nut provides increased resistance to turning in the application, especially when installed in softer materials.
The reduced countersunk head also known as thin sheet rivet nuts allows this type of rivet nut to be used in applications without any extra hole preperation, providing a low profile flush fit to the application. Enabling reduced countersunk rivet nuts to be installed in post-painted or pre-coated applications without damaging the surface.
Reduced countersunk (thin sheet) rivet nuts with a knurled body and open end are installed using a special tool with a threaded stud (nose) that engages with the internal threads of the rivet nut an pulls upwards, in turn deforming the unthreaded section of the rivet nut to expand under the reverse side side of the material, providing a high strength permanent thread in a thin sheet material.
|Country of Manufacture||India|
|Socket Type||Insert Nuts|